Elco Klockner Burners

We are trading in industrial gas burners, modulating gas burners and blown air fuel oil burners which have monobloc structure with ground clearance limited to 200 mm. These have centered combustion tube, fastened on the front wall of the generator by a sliding clamp for efficient functioning.

The salient features are as follows:

• Ergonomic design allowing easy access to inner components
• Support plate of components made of synthetic material and removable for maintenance
• Adjustment of air flow by graduated knob acting on the travel of the air shutter on pressure side
• Closing of air shutter in stopping condition by return spring
• Fan characteristics adjustable at the level of the air inlet without removal
• Mounted hoses for fuel feed, 0.9 long with G3/8 adjustment couplings supplied
• Complete electrical wiring with connection by 7-pole plug
• 2800 rpm motor
• Single phase power supply 230 V / 50 Hz / 0.7 A
• Electronic control for monitoring and security with warning light
• Quick removal of electronic control and ignition transformer flame control by removable photoresistive cell
• Protective hood easy to remove through a single center screw
• Fully automated
• Meet the applicable requirements of EN267, EN60335, EN55014, EN55104 standards
• Fit all heating equipment, thanks to pressure adjustment and air flow devices
• Enjoy low level noise, as a result of the optimized configuration of the ventilation and insulated hood
• Both the combustion elements and internal parts without prior removal of the fuel piping, simply by turning round the support plate of the components
• Includes the various modes of operation types matching most applications

We are offering Elco Fuel Oil Burners with mechanical atomization to our clients. Having monobloc structure, these are ergonomically designed allowing easy access to inner components.

The salient features are as follows:

• Combustion tube, fastened on the front wall of the generator by a sliding clamp
• Sound-proof air box
• Support plate of components removable for maintenance
• Adjustment of air on pressure side
• Closing of air shutter in stopping condition by return spring or hydraulic control
• 1 or 2 pressure stage pump with solenoid valve(s)
• Hoses for fuel feed, 1.2 m long with G3/8 adjustment couplings supplied
• Complete electrical wiring with connection by 7-pole plug and 4-pole connector for the 2- rate types
• 2800 rpm motor
• Single-phase power supply 230 V / 50 Hz / 3.A (60Hz on request)
• LOA 24 control box
• Quick removal of cabinet support
• Flame control by removable photoresistive cell
• Removable protective hood
• 60 to 350 kw
• Fully automated blown-air burners
• Meet the applicable requirements of EN267, EN60335, EN55014, EN55104 standards.
• Fit all heating equipment, thanks to pressure adjustment and air flow devices
• Enjoy low level noise, as a result of the optimized configuration of the ventilation and insulated air box
• Elements and internal parts are easily accessible, without prior removal of the fuel piping, simply by turning round the support plate of the components.
• The EL02/03B range includes various modes of control and operation types matching most applications

We are engaged in providing our clients with blown air gas burners using both natural gas and propane. Having monobloc structure, these have combustion tube, fastened on the front wall of the generator by a sliding clamp.

The salient features are as follows:

• Closing of air shutter by servomotor
• Pressure sensor to control air pressure of Turbine
• One set of electrically assembled and Wired valves including:

1. Upstream gas pressure switch

• Possibility to connect the gas line on the right or left-hand side
• Removable protective hood
• Complete electrical wiring (up to the ek4) with numbered terminal blocks
• 2800 rpm motor
• Three-phase power supply 400 V / 50 Hz (60 Hz on request)
• LGB22 or LFL1¿control box
• Flame control by ionization sensor or UV cell
• 100 to 2900 kw
• Fully automated blown-air burners
• Meet the applicable requirements of EN676, EN60335, EN55014, EN55104 standards.
• Fit all heating equipment, thanks to pressure adjustment and air flow devices
• EK3/4/5 burners enjoy low level noise, as a result of the optimized configuration of the ventilation
• Includes various modes of control and operation types matching most applications

Note: Dual-fuel models are also available

We are offering to our clients, modulating gas burners which are can be connected to a gas pipe on the right- or left-hand side. These have fastening clip with seal and nuts and bolts for efficient functioning.

The salient features are as follows:

• Forced draught, modulating gas burner
• Monobloc structure
• Fastening clip with seal and nuts and bolts
• Housing with left- or right-hand side opening clamp
• Adjustable, removable combustion head
• Air suction adjusted using a damper with closure upon shutdown
• Air pressure switch
• Mechanical, point-by-point adjustable air-gas system
• Electrical cabling with numbered terminals for connection to a cabinet (comes separately)
• Ignition transformer
• 2800 rpm motor
• Three-phase 400 V 50 Hz power supply
• LFL1 ... or LGK16 safety and control box
• Flame control using a UV cell 1000 to 11000 kW
• Fully automated
• Meet the applicable requirements of EN676 standards
• Using the air flow rate and speed adjustment devices, these can be adapted to any heating equipment

The range includes various modes of control and operation types matching most applications. We can also provide Dual-fuel models.